Only 5 steps installation 10L0L Club Car DS Golf Cart LED Light Kit

Certainly! Here's a simplified 5-step installation guide for the 10L0L Club Car DS Golf Cart LED Light Kit


Tools and Materials Needed:

Installation Steps:

  1. Prepare the Golf Cart: Turn off the golf cart and disconnect the battery. If there are existing lights, remove them.

  2. Mount the Lights: Install the LED lights in the desired locations on the front and rear of the golf cart using the provided hardware.

  3. Connect Wiring: Connect the wiring harness to the positive (+) and negative (-) terminals of the golf cart battery. Route the wiring neatly along the frame using zip ties.

  4. Install the Switch: Install the on/off switch on the dashboard. Secure the switch in place (drill a hole if needed) and connect it to the wiring harness.

  5. Test the Lights: Turn on the golf cart and test the all LED lights of golf cart accessories. Ensure that all lights, including headlights, taillights, and turn signals, are functioning properly.

This simplified guide covers the essential steps for installing the 10L0L Club Car DS Golf Cart LED Light Kit. Always refer to the specific instructions provided with the kit for any model-specific details and follow safety precautions. If you are uncertain about any step, consider seeking assistance from a professional or someone experienced in golf cart electrical installations.

10l0lClub car dsColf cart led light kitGolf cart accessoriesGolf cart parts

Leave a comment

All comments are moderated before being published